In modern methods engineering, ergonomics has ceased to be a peripheral prevention discipline (occupational safety, PRL) and has become a critical mathematical vector of productivity. If we analyze the cost structure of any industrial plant, biomechanical load acts as a "silent thief" of Takt Time, forcing engineering departments to inflate the Rest Allowance Coefficients (K) and destroying the theoretical utilization of the operator.
In this technical analysis by Cronometras, we dissect the direct correlation between the reduction of TMUs (Time Measurement Units), the management of variable fatigue and OEE stability. We are not talking about occupational health; we are talking about shielding the standard time.
The Hidden Equation: How "Muri" (Overload) Alters the Standard Time ($T_t$)
For a time study engineer, the Type Time formula is sacred. According to OIT regulations and good industrial engineering practice, it is defined as:
Where:
- = Type Time (Standard).
- = Basic Time (normalized to 100 Bedaux/centesimal activity).
- = personal needs + Base Fatigue + Variable Fatigue.
The "Class 1" Error in Predetermined Time Systems
The systemic error in most plants is to calculate the basic times ($T_b$) using predetermined time systems (such as MTM-1, MTM-UAS or MOST) assuming ideal conditions or "Class 1". The analyst models the movement on paper, but the reality of the plant introduces "Muri" (Overload).
When an operator works with forced postures (e.g. trunk flexion >20º) or under static loads, physiology exacts a toll. This forces allowances for Variable Fatigue to be applied, ranging between 12% and 20% of the basic time in order to comply with collective agreements and OIT regulations.
The Micro-break Phenomenon and Variance
Even more critical for OEE is what is not measured. A workstation with poor ergonomics causes the operator to introduce non-standardized movements (micro-breaks, stretching, grip changes) to restore blood flow. These deviations are not detected in a spot time study, but they generate a variance ($S^2$) that destabilizes line balancing and makes it impossible to maintain a constant 100 Rating over 8 hours.
Technical Synergy: Integrating MTM and EAWS to Eliminate Waste
At Cronometras we uphold a technical maxim: A work method is not valid if it is not physiologically sustainable. A fast cycle that exhausts the operator in 4 hours is a false cycle.
High-level methodology demands auditing processes with EAWS (Ergonomic Assessment Worksheet) simultaneously with the MTM-UAS analysis.
Case Study: In-Line Assembly (Metalworking)
Let us analyze a fastening station in a low zone (height < 50 cm):
- Situation A (Current): The operator performs MTM movements of the
AB(Bend down) andAS(Straighten up) type.- MTM cost: ~60 TMU per cycle.
- Required Fatigue allowance: 15% (due to severe postural load).
- Situation B (Ergonomic Redesign): Implementation of a lifting platform or rotator.
- Impact 1: Physical elimination of the
AB/ASmovements (-60 direct TMU). - Impact 2 (The hidden multiplier): By eliminating the postural load, the Fatigue Coefficient drops from 15% to 5%.
- Impact 1: Physical elimination of the
Result: We not only reduce the Basic Time ($T_b$), but we also reduce the multiplier in the formula. The net technical productivity gain exceeds 20%, validating the engineering investment.
2025 Regulatory Framework: The Cost of Ignoring ISO 11228 and the Demographic Factor
Plant Managers must prepare for a restrictive regulatory and demographic scenario in Spain and Europe.
1. Ageing of the Workforce (Ageing Workforce)
The average age of the industrial operator will exceed 48 years in 2025. Functional capacity declines, and predetermined times (designed under "young average man" standards) will cease to be realistic without adjustments. If technical ergonomics is not improved, trade unions will demand upward revisions of the fatigue allowances, making the operator-minute more expensive.
2. ISO Audits and Frequency Penalty
The reference standards for time calculation must be cross-referenced with:
- UNE-EN ISO 11228 (Manual Handling): It is no longer enough to assess the weight (kg). The standard penalizes frequency (cycles/minute) exponentially. A high-frequency cycle with moderate weight can be declared "Not Suitable", forcing a reduction in line speed or staff rotation (inefficiency).
- ISO 11226 (Static Postures): The impact of Holding Time (the time a posture is held) directly affects assembly quality and is a blind spot in traditional time studies.
High-Performance Engineering Solutions (The "Cronometras" Portfolio)
We do not sell comfort; we sell process stability and Takt Time assurance. The solutions must be hard engineering:
- Passive Exoskeletons:
- For workstations with reach (Reach/Move) movements above shoulder level.
- Technical Objective: It does not seek to reduce the TMU of the movement, but to reduce metabolic consumption in order to keep the 100 Bedaux Rating stable until the last hour of the shift.
- Cobotics for "Pick & Place":
- Strict transfer of heavy loads to the robot (ISO 11228).
- The operator is freed up for fine-dexterity, value-added operations, reducing cycle variability.
- Video-Analytics & AI:
- Use of advanced software that overlays ergonomic heat maps (REBA/RULA in real time) onto the time study. It makes it possible to identify the exact second where the cycle breaks down due to biomechanical overload.
Impact on OEE and the ROI of the Ergonomic Intervention
For Operations Management, the financial data are conclusive. Applied ergonomics is a profitability tool:
- Variance Reduction ($S^2$): Ergonomically optimized workstations (RULA score < 3) show a 40% lower standard deviation in cycle times. This enables MRP reliability and production planning without safety "buffers".
- Quality Rate: 30% of defects in manual processes occur in the last 90 minutes of the shift. The root cause is localized muscular fatigue that prevents motor precision. Ergonomics = Quality at the end of the shift.
- Return on Investment (ROI): Our average payback calculations stand at 4.5 months, based solely on time savings (reduction of allowances) and the reduction of technical absenteeism.
Frequently Asked Questions about Times and Ergonomics (Technical FAQ)
How is the % allowance for variable fatigue calculated according to OIT?
It is calculated using rating tables that score factors such as force exerted, posture, vibration and environmental conditions. These points are converted into a percentage that is added to the base rest allowance coefficient (generally 4-5%) and personal needs.
What is the difference between MTM-UAS and MTM-2 in high-physical-load workstations?
MTM-UAS is preferable for series production of large batches with medium-to-long cycles and allows a better description of compound body movements. In high-load workstations, MTM-UAS facilitates the identification of "Auxiliary" movements that are a symptom of poor ergonomics, whereas MTM-2 could mask them due to its lower granularity.
When is it profitable to introduce an exoskeleton on an assembly line?
It is profitable when the operation involves holding the arms above the shoulders for more than 30% of the cycle or repetitive lumbar handling, and a drop in the work rate (activity) of more than 10% is detected in the last hours of the shift.
How does the RULA score affect the OEE calculation?
A high RULA score (>6) indicates a high probability of micro-stoppages and speed reduction (Performance Loss), as well as an increase in errors (Quality Loss). Improving the score impacts two of the three OEE factors directly.
Do Your Rest Allowance Coefficients Reflect the Reality of Your Plant?
The standard time is money. If your operators do not reach the Takt Time without getting fatigued, or if your OEE fluctuates inexplicably at the end of the shift, your methods engineering has a profitability leak.
At Cronometras we do not "assume" times, we shield them scientifically by integrating work measurement with advanced biomechanics.
[Request an Audit of Fatigue Allowances and MTM-EAWS Analysis]
Don't want to do it yourself? We do it for you from €800
If you prefer to outsource it, Cronometras delivers a complete time and motion study from a single video: elemental breakdown, OIT/TAL fatigue allowances, standard time with tolerances, and a report in PDF + Excel + JSON ready to present to management.